News
-
Standard Edge vs. Sharpened Edge: Which Pottery Trimming Tool Suits You Best?
Nov 10, 2026
KOVO TOOLS
Standard Edge or Sharpened Edge? The difference isn't simply about sharpness—it's about how you prefer to trim. Explore how each cutting edge performs with different clay types and firmness levels, and find the right balance of cutting ease, control, and comfort for your pottery work.
-
Standard Edge vs. Sharpened Edge Carbide Pottery Trimming Tools: Which Should You Choose?
Sep 10, 2026
KOVO TOOLS
Learn the difference between Standard Edge and Sharpened Edge carbide pottery trimming tools, how each cutting edge feels on the clay, and which option is better suited to everyday trimming, precise foot rings, edges, and finishing work.
-
Tungsten Carbide Pottery Trimming Tools: Grades, Strength & Tool Life
Aug 28, 2026
KOVO TOOLS
Tungsten carbide trimming tools are known for long-lasting sharpness and wear resistance, but tool life also depends on carbide material grade, cutting-head geometry, clay condition, and how the tool is used. This guide explains how hardness and bending strength affect performance, what increases breakage risk, and how to help carbide pottery trimming tools last longer.
-
How to Use Carbide Pottery Trimming Tools Without Chattering
Aug 6, 2026
KOVO TOOLS
Carbide pottery trimming tools need less pressure than many potters expect. Learn how to control the cutting angle, prevent chattering, and achieve cleaner, more stable trimming.
-
Is Your Pottery Trimming Tool Dull—or Is the Clay Too Wet or Too Dry?
Jul 27, 2026
KOVO TOOLS
When a pottery trimming tool sticks, scrapes, or chatters, the tool may not be the real problem. This guide explains how clay that is too wet or too dry affects trimming, how to recognize the right leather-hard stage, and how to tell whether the issue comes from the clay or the cutting edge.
-
7 Common Pottery Trimming Problems—and How to Fix Them
Jul 15, 2026
KOVO TOOLS
Is your trimming tool dragging, chattering, or leaving an uneven foot ring? Here are seven common pottery trimming problems, what causes them, and what to adjust before your next pass.